Yamaha MT-07 Maintenance Schedule Chart

The following manual maintenance guide is intended for the MT-07 motorcycles of model years 2014-2023. There are several parts that require regular maintenance and attention to keep the motorcycle in prime condition and avoid damage while riding. The Yamaha MT-07 is a naked bike motorcycle launched by Yamaha since 2014. It features an M419E engine with a liquid-cooled 688cc DOHC configuration.

Periodic maintenance chart for the emission control system

• From 24000 mi (37000 km) or 36 months, repeat the maintenance intervals starting from 8000 mi (13000 km) or 12 months.
• Items marked with an asterisk require special tools, data and technical skills, have a Yamaha dealer perform the service.

No.		ITEM	ROUTINE	INITIAL	ODOMETER READINGS
				600 mi (1000 km) or 1 month	4000 mi (7000 km) or 6 months	8000 mi (13000 km) or 12 months	12000 mi (19000 km) or 18 months	16000 mi (25000 km) or 24 months	20000 mi (31000 km) or 30 months
1	*	Fuel line	Check fuel hoses for cracks or damage. Replace if necessary.		✓	✓	✓	✓	✓
2	*	Spark plugs	Check condition. Adjust gap and clean.		✓		✓		✓
			Replace.			✓		✓
3	*	Valve clearance	Check and adjust valve clearance when engine is cold.	Every 26600 mi (42000 km)
4	*	Crankcase breather system	Check breather hose for cracks or damage. Replace if necessary.		✓	✓	✓	✓	✓
5	*	Fuel injection	Adjust synchronization.	✓	✓	✓	✓	✓	✓
6	*	Exhaust system	Check for leakage. Tighten if necessary. Replace gasket(s) if necessary.	✓	✓	✓	✓	✓	✓
7	*	Evaporative emission control system (for California only)	Check control system for damage. Replace if necessary.				✓		✓

General maintenance and lubrication chart

No.		ITEM	ROUTINE	INITIAL	ODOMETER READINGS
				600 mi (1000 km) or 1 month	4000 mi (7000 km) or 6 months	8000 mi (13000 km) or 12 months	12000 mi (19000 km) or 18 months	16000 mi (25000 km) or 24 months	20000 mi (31000 km) or 30 months
1	*	Diagnostic system check	Perform dynamic inspection using Yamaha diagnostic tool. Check the error codes.	✓	✓	✓	✓	✓	✓
2	*	Air filter element	Replace.	Every 24000 mi (37000 km)
3		Air filter check hose	Clean.	✓	✓	✓	✓	✓	✓
4	*	Clutch	Check operation. Adjust or replace cable.	✓	✓	✓	✓	✓	✓
5	*	Front brake	Check operation, fluid level, and for fluid leakage. Replace brake pads if necessary.	✓	✓	✓	✓	✓	✓
6	*	Rear brake	Check operation, fluid level, and for fluid leakage. Replace brake pads if necessary.	✓	✓	✓	✓	✓	✓
7	*	Brake hoses	Check for cracks or damage. Check for correct routing and clamping.		✓	✓	✓	✓	✓
			Replace.	Every 4 years
8	*	Brake fluid	Change.	Every 2 years
9	*	Wheels	Check runout and for damage. Replace if necessary.		✓	✓	✓	✓	✓
10	*	Tires	Check tread depth and for damage. Replace if necessary. Check air pressure. Correct if necessary.		✓	✓	✓	✓	✓
11	*	Wheel bearings	Check bearings for smooth operation. Replace if necessary.		✓	✓	✓	✓	✓
12	*	Swingarm pivot bearings	Check operation and for excessive play.		✓	✓	✓	✓	✓
			Moderately repack with lithium-soap-based grease.	Every 32000 mi (50000 km)
13		Drive chain	Check chain slack, alignment and condition. Adjust and lubricate chain with a special O-ring chain lubricant thoroughly.	Every 600 mi (1000 km) and after washing the motorcycle, riding in the rain or riding in wet areas
14	*	Steering bearings	Check bearing assemblies for looseness.	✓	✓	✓	✓	✓	✓
			Moderately repack with lithium-soap-based grease.	Every 12000 mi (19000 km)
15	*	Chassis fasteners	Check all chassis fitting and fasteners. Correct if necessary.		✓	✓	✓	✓	✓
16		Brake lever pivot shaft	Apply silicone grease lightly.		✓	✓	✓	✓	✓
17		Brake pedal pivot shaft	Apply lithium-soap-based grease lightly.		✓	✓	✓	✓	✓
18		Clutch lever pivot shaft	Apply lithium-soap-based grease lightly.		✓	✓	✓	✓	✓
19		Shift pedal pivot shaft	Apply lithium-soap-based grease lightly.		✓	✓	✓	✓	✓
20		Sidestand pivot	Check operation. Apply molybdenum disulfide grease lightly.		✓	✓	✓	✓	✓
21	*	Sidestand switch	Check operation and replace if necessary.	✓	✓	✓	✓	✓	✓
22	*	Front fork	Check operation and for oil leakage. Replace if necessary.		✓	✓	✓	✓	✓
23	*	Shock absorber assembly	Check operation and for oil leakage. Replace if necessary.		✓	✓	✓	✓	✓
24	*	Rear suspension link pivots	Check operation. Correct if necessary.			✓		✓
25		Engine oil	Change (warm engine before draining).	✓	✓	✓	✓	✓	✓
26		Engine oil filter cartridge	Replace.	✓		✓		✓
27	*	Cooling system	Check hoses for cracks or damage. Replace if necessary.		✓	✓	✓	✓	✓
			Change coolant.					✓
28	*	Front and rear brake switches	Check operation.	✓	✓	✓	✓	✓	✓
29	*	Control cables	Apply Yamaha cable lubricant or other suitable cable lubricant thoroughly.	✓	✓	✓	✓	✓	✓
30	*	Throttle grip	Check operation. Check throttle grip free play, and adjust if necessary. Lubricate cable and grip housing.		✓	✓	✓	✓	✓
31	*	Lights, signals and switches	Check operation. Adjust headlight beam.	✓	✓	✓	✓	✓	✓

Trending