Yamaha Fazer (FZ1) Engine Oil capacity and Best Oil Specifications



This engine oil manual guide is for Yamaha Fazer (FZ1). is a yamaha sport-touring motorcycle, produced between 2010 and 2013. It features a 998 cm³ liquid-cooled, 4-stroke, DOHC engine with an inline 4-cylinder arrangement. The bore and stroke measure 77.0 × 53.6 mm (3.03 × 2.11 in). The Fazer comes with a curb weight of 220 kg (485 lb) for the FZS10D model and 221 kg (487 lb) for the FZS10DC model. Maintaining optimal engine health is essential to ensure its longevity and performance. A crucial aspect of this maintenance is regular engine oil checks, oil changes, and replacing the oil filter cartridge at specified intervals. This article will guide you through the detailed steps for checking and changing engine oil in your Yamaha Fazer, ensuring that your motorcycle runs smoothly and efficiently.

Importance of Regular Oil Checks and Changes

Engine oil plays a vital role in the smooth functioning of your Yamaha Fazer by lubricating the engine's moving parts, reducing friction, cooling the engine, and keeping it clean. Regular oil checks and changes ensure that your engine operates efficiently and lasts longer. Here's why maintaining the right engine oil level and replacing it on time is crucial:

  • Lubrication: Engine oil provides lubrication to moving parts, reducing friction and wear.
  • Cooling: Oil helps to dissipate heat generated by the engine, keeping it cool.
  • Cleaning: It removes dirt and debris, preventing sludge buildup in the engine.
  • Protection: Regular oil changes protect the engine from corrosion and damage.

Operating the engine with old or low-quality oil can lead to serious engine problems, including overheating, reduced performance, and even engine failure. Therefore, it is vital to adhere to the manufacturer's guidelines for engine oil maintenance.

Recommended Engine Oil Specifications



For optimal performance, Yamaha recommends using specific engine oil that meets certain quality standards. Here are the recommended engine oil specifications for the Yamaha Fazer:

  • Recommended Brand: YAMALUBE
  • Type: SAE 10W-30, 10W-40, 10W-50, 15W-40, 20W-40, or 20W-50
  • Engine Oil Grade: API service SG type or higher, JASO standard MA

Oil Quantity

  • Without Oil Filter Cartridge Replacement: 2.90 L (3.07 US qt, 2.55 Imp.qt)
  • With Oil Filter Cartridge Replacement: 3.10 L (3.28 US qt, 2.73 Imp.qt)

Important Considerations

  • Avoid Additives: Do not mix any chemical additives with the engine oil, as they may cause clutch slippage.
  • Avoid Diesel Oils: Do not use oils with a diesel specification of "CD" or higher quality than specified.
  • No "Energy Conserving" Oils: Avoid using oils labeled "ENERGY CONSERVING II" or higher, as they may not be suitable for your engine.
  • Prevent Contamination: Ensure no foreign material enters the crankcase during oil changes.

How to Check the Engine Oil Level



Checking the engine oil level before each ride is a simple yet vital task that ensures your Yamaha Fazer is always ready for optimal performance. Follow these steps to accurately check the engine oil level:

  1. Position the Motorcycle: Place the motorcycle on the center stand on a level surface. Avoid any tilt to the side, as it can result in a false oil level reading.

  2. Warm Up the Engine: Start the engine and let it idle for several minutes to warm it up. Then, turn off the engine.

  3. Allow Oil to Settle: Wait a few minutes for the oil to settle in the crankcase.

  4. Check the Oil Level: Look through the engine oil level check window located at the bottom-right side of the crankcase. The oil should be between the minimum and maximum level marks.

    • If the Oil Level is Low: If the oil is below the minimum level mark, add sufficient oil of the recommended type to bring it to the correct level.

How to Change Engine Oil and Oil Filter Cartridge

Changing the engine oil and replacing the oil filter cartridge are critical maintenance tasks that should be performed at regular intervals. Here’s a step-by-step guide to help you through the process:

Steps to Change Engine Oil

  1. Position the Motorcycle: Place the motorcycle on a level surface to ensure accurate oil drainage.

  2. Warm Up the Engine: Start the engine and let it idle for several minutes. Then, turn it off to allow the oil to become less viscous, facilitating easier drainage.

  3. Prepare an Oil Pan: Position an oil pan under the engine to collect the used oil.

  4. Drain the Oil:


    • Remove the engine oil filler cap.
    • Remove the engine oil drain bolt and its gasket to allow the oil to drain from the crankcase.


  5. Optional - Replace the Oil Filter Cartridge:

    • Skip Steps 5-7 if not Replacing the Oil Filter Cartridge.
    • Remove the oil filter cartridge using an oil filter wrench (available at Yamaha dealers).
    • Apply a thin coat of clean engine oil to the O-ring of the new oil filter cartridge to ensure a proper seal.


    • Install the new oil filter cartridge using the oil filter wrench, and tighten it to the specified torque with a torque wrench.
      • Tightening Torque for Oil Filter Cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf)

  6. Install the Drain Bolt:

    • Install the engine oil drain bolt with a new gasket.
    • Tighten the bolt to the specified torque using a torque wrench.
      • Tightening Torque for Engine Oil Drain Bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf)

  7. Refill with Recommended Oil:

    • Refill the engine with the specified amount of recommended engine oil.
    • Without oil filter cartridge replacement: 2.90 L (3.07 US qt, 2.55 Imp.qt)
    • With oil filter cartridge replacement: 3.10 L (3.28 US qt, 2.73 Imp.qt)
    • Install and tighten the engine oil filler cap securely.

  8. Check for Spills:

    • Wipe off any spilled oil on engine parts after the engine and exhaust system have cooled down.

Post-Change Procedures

  1. Start the Engine:

    • Start the engine and let it idle for several minutes.
    • Check for oil leaks around the oil drain bolt and filter cartridge. If oil is leaking, immediately turn the engine off and investigate the cause.

  2. Check the Oil Level:

    • After starting the engine, the engine oil level warning light should go off if the oil level is sufficient.
    • If the oil level warning light flickers or remains on, turn off the engine and have a Yamaha dealer check the vehicle.

  3. Finalize the Process:

    • Turn off the engine, wait a few minutes for the oil to settle, and check the oil level through the check window.
    • Add oil if necessary to ensure it is within the minimum and maximum marks.

Regular engine oil maintenance is vital for the Yamaha Fazer's performance and longevity. By following the recommended guidelines for checking, changing, and replacing the engine oil and oil filter cartridge, you can ensure your motorcycle runs smoothly and efficiently. This maintenance routine not only keeps your engine healthy but also enhances your riding experience, making every journey with your Yamaha Fazer enjoyable and reliable.

Whether you're a casual rider or a motorcycle enthusiast, taking care of your Yamaha Fazer's engine oil is an investment in performance and durability. Ride with confidence, knowing that your motorcycle is in top condition and ready to deliver the thrilling experience that Yamaha is renowned for.

Trending

0 Response to "Yamaha Fazer (FZ1) Engine Oil capacity and Best Oil Specifications"

Post a Comment

Subscribe to: Post Comments (Atom)