KTM RC 125 Maintenance Schedule (Service Intervals)

every 48 months
every 24 months
every 12 months
every 15,000 km (9,300 mi)
every 7,500 km (4,650 mi)
after 1,000 km (620 mi)
Read out the fault memory using the KTM diagnostics tool.	○	●	●	●	●	●
Check that the electrical system is functioning properly.	○	●	●	●	●	●
Check that the brake linings of the front brake are secured.	○	●	●	●	●	●
Check that the brake linings of the rear brake are secured.	○	●	●	●	●	●
Check the brake discs.	○	●	●	●	●	●
Check the brake lines for damage and leakage.	○	●	●	●	●	●
Check the front brake fluid level.	○	●	●	●
Change the front brake fluid.					●	●
Check the rear brake fluid level.	○	●	●	●
Change the rear brake fluid.					●	●
Change the engine oil and oil filter, clean the oil screen.	○	●	●	●	●	●
Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for cracking, tightness, and correct routing.	○	●	●	●	●	●
Empty the drainage hoses.	○	●	●	●	●	●
Check the cables for damage and routing without sharp bends.	○	●	●	●	●	●
Check the frame.			●
Check the link fork.			●
Check the fork bearing for play.		●	●
Check the steering head bearing for play.	○	●	●
Check the wheel bearing for play.		●	●
Check the shock absorber and fork for leaks.	○	●	●	●	●	●
Check the tire condition.	○	●	●	●	●	●
Check tire pressure.	○	●	●	●	●	●
Check the chain, rear sprocket, and engine sprocket.		●	●	●	●	●
Check the chain tension.	○	●	●	●	●	●
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth operation.	○	●	●	●	●	●
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.	○	●	●	●	●	●
Check the valve clearance, change the spark plug.			●
Change the air filter, clean the air filter box.		●	●
Check the headlight setting.	○	●	●
Check the tightness of the safety-relevant screws and nuts which are easily accessi- ble.	○	●	●	●	●	●
Clean the dust boots of the fork legs.		●	●
Check that the radiator fan is functioning properly.	○	●	●	●	●	●
Check the coolant level in the compensating tank.	○	●	●	●	●
Check the antifreeze.		●	●		●
Change the coolant.						●
Final check: Check the vehicle is roadworthy and take a test ride.	○	●	●	●	●	●
Read out the error memory after the test ride using the KTM diagnostics tool.	○	●	●	●	●	●
Set the service interval display.	○	●	●	●	●	●
Enter electronic proof of service.	○	●	●	●	●	●